Epoxy Flake Floors in Goodyear, AZ

Epoxy flake floors are the finish most Goodyear homeowners pick for the garage. Colored vinyl chips are broadcast into a wet base coat until the surface is fully covered, the loose chips are scraped and vacuumed off, and a clear topcoat seals it all in. The result is a speckled, textured floor that looks like terrazzo from a distance and feels slightly gritty underfoot.

Built for a dusty climate

Garages here collect fine dust. During the monsoon season, which the Phoenix-area weather office sets from June 15 to September 30, storms can raise dust storms that push grit under the door. On a solid-color floor every bit of that shows. A flake floor breaks up the surface visually, so a garage looks clean for days longer between sweeps. The texture also gives tires and shoes more grip when the floor is wet from a hose rinse or a storm.

How a flake floor is built

• Grinding: the slab is diamond ground to open the concrete and remove sealers and stains.
• Repair: cracks and chips are filled so they do not telegraph through.
• Base coat: a colored epoxy or polyaspartic base is rolled out in sections.
• Broadcast: flakes are thrown by hand into the wet base until no base color shows.
• Scrape and vacuum: once the base sets, loose and standing chips are scraped flat and vacuumed off.
• Topcoat: one or two clear coats lock the chips in and set the final texture and sheen.

Chip size and color

Flakes come in sizes from about 1/16 inch to 1/2 inch. Smaller chips give a tighter, granite-like look. Larger chips read as bolder and more casual. Blends range from tans and grays that match desert stucco to darker mixes with black and white. In a garage that gets afternoon sun, lighter blends stay cooler to the touch and show less dust than dark ones.

Full broadcast or partial

A full broadcast covers the base completely and gives the most texture and the thickest build. A partial or light broadcast scatters fewer chips over a solid color for a cleaner, more modern look. Full broadcast floors usually hide imperfections in the slab better, which helps on garages with lots of hairline cracks or patched areas.

The topcoat matters most outdoors and near the door

The clear topcoat is what you walk and drive on. HomeGuide rates standard epoxy as poor to fair for UV resistance and polyaspartic as excellent. On any flake floor that sees sunlight, we use a UV-stable topcoat so the clear layer does not yellow and dull the colors underneath.

Where else flake floors work

Beyond the garage, flake systems work well in laundry rooms on slab, home gyms, workshops, covered patios and small commercial spaces such as salons and break rooms. They are easy to mop, they hide scuffs, and they can be touched up in a small area if something heavy gets dropped.